Configure the color of the Monitor, Printer and Scanner


Make a perfect color rendering properly configuring the monitor, printer and scanner. max! The majority of users have both a scanner is a printer , and uses the combination of these devices to make reprints of old photographs . However, even using paper and ink adequate, the color rendition of prints is significantly different from the original photograph.

The modern printers use the CMYK (which stands for ” Cyan Magenta Yellow blacK ” , cyan , magenta, yellow and black) to reproduce the colors as scanners and monitors opt for RGB ( “Red Green Blue” , red, green and blue) . The result of this incongruity is that , generally , the printers are not able to reproduce the same color spectrum to the scope of monitors and scanners . Fortunately, since version 98 of Windows ICM ( ” Image Color Management” system of color management of the image) , developed by Microsoft and the ‘ “International Colour Consortium ” ( an international consortium for the definition of standards in the management of colors in computer environments ) , ensures a homogeneous color reproduction regardless of the device used .

Color Management

This step by step will allow you to enable and configure correctly ICM Turn off the monitor and let it rest for at least half an hour, to make sure it is completely free of its electricity load . Check that no source of light (natural or artificial ) shine directly on the screen . Finally, make sure your system drivers are installed that enable a correct recognition of the monitor from the operating system. Click with the right mouse button in an empty spot on the desktop and select the Properties item . Opening of the dialog box , bring to the fore the Settings tab and then click the Advanced button. Within the next dialog box , click the Monitor tab. If your monitor is identified as ” Plug and Play Monitor ” you should clip which model you have available ( read the details at the rear of the monitor ) , visit the manufacturer’s website and download the driver. Make sure that your video card is set to use the greater depth of color available.

To do this, click with the right mouse button in an empty spot on your desktop , and choose the Properties item . Within the dialog box , open the Settings tab and make sure that the voice Colors is set to Maximum , 24, or ( better) 32-bit . Click ” OK ” to exit the dialog box. Afterwards , use the controls on your monitor to set the contrast at the highest level available . In case of difficulty , reading the manual of your monitor may give you a big hand. Now focus your attention on the parameter relative to the brightness . Establish a connection to the Internet and go to: http://en.wikipedia.org/wiki/SMPTE_color_bars , or
SMPTE color bars . In any case, you can search for ” SMPTE color bars” in any search engine. The image that you will find (similar to television test pattern ) is a typical test proposed by SMPTE to check the value of the brightness of your monitor. Within the image in colored bands you should see three distinct shades of gray vertical bar under the red. If not , increase the level of brightness of your monitor until you can not distinguish sharply the three bars . After reaching a satisfactory configuration , close the connection to the Internet. Start the graphics or photo editing program you use to print your photos. This example uses the latest version of Paint Shop Pro ( “X” ), but the procedure is similar for all programmi.Posizionatevi on the ” Color Management ” in the File menu and in the menu that appears , click on ” monitor Calibration ” .

color rendering

This will launch a wizard that will allow you to properly calibrate your monitor through a sequence of steps based on decreasing levels of brightness . Put a check mark next to the item “Advanced Options” to access the individual RGB channels. Each box contains lateral areas composed of horizontal bands that enclose a central area of ​​solid color. The goal is to match the central area with the brightness of the side areas , using the controls in the dialog box . If necessary , move your eyes from the monitor to simulate the merger of the stripes on the side with the relevant central areas of the panes . Click with the right mouse button in a clear area of your desktop and select the Properties item .

Bring the Settings tab in the foreground and , inside , click on the Advanced button. Navigate to the tab ” Color Management ” and check if there is an ICM profile associated with your monitor. If not , you should be able to download one from the Web site of the manufacturer of your video screen to add an ICM profile manually, click the Add button : Use the dialog box ” Add Profile Association ” to position yourself next to the folder “C:\WINDOWS\System32\Spool\Drivers\Color ” and select the profile you want . Now make the same operation for the printer. Click on ” Control Panel ” in the Start menu , and then opt for the ” Printers and Faxes”. Click with the right button on your printer , and in the menu that appears , select the Properties item . In the dialog box brought to the foreground the tab ” Color Management ” . What you’ll find on this tab depends strictly on the model of your printer.

Some manufacturers add specific ICM profiles during the installation of the driver : others, however, do not follow this policy. In the second case , you can use the Add button (as described in the previous step ) to choose a custom profile within your hard drive. To check if your scanner has a profile , in the ” Control Panel” and double-click on the ” Scanners and Cameras ” . Again , click the right button on the icon that identifies your scanner and select the Properties item . Bring in the foreground tab ” Color Management ” .

Check the presence of a profile: in its absence , use the Add button as described in the previous steps . At this point , you are ready to enable color management in your editing program . In Paint Shop Pro X , position yourself on the “ Color Management ” in the File menu , and then click again on ” Color Management ” in the submenu. Place a check mark next to the item “Enable Color Management ” and then choose the option ” Color Management Basic : Specifies the way colors appear on the screen and on the printer .” Also, make sure that within the respective drop-down menu are selected related ICM profiles for both the monitor and for the stampante.Fate click “OK ” to confirm your choice and exit.

At this point, when you are about to print a document rich in color ( a photo , for example) , be sure to click on the Properties button after selecting the Print option in the File menu. The software to manage print properties vary widely from printer to printer , but most of the elements upon which to act to change the quality of your prints resides within the dialog box accessed through the Properties button